Automations
Scenes
Use HPzenAi scenes for one-tap filling, shutdown, irrigation, maintenance, and normal operation actions.
How Scenes Work
Scenes are manual actions saved in the Smart tab. Use them when a user should decide when the action runs, such as starting irrigation now, stopping all controlled loads, or pausing automation behavior during maintenance.
Visual reference coming soon
Available Scenes
| Scene | Use |
|---|---|
| Fill Tank Now | Open the inlet, run the pump, and stop when the tank is full. |
| Holiday Mode | Lock water control while the site is unattended. |
| Emergency Stop | Turn controlled equipment off and close controlled valves immediately. |
| Start Irrigation Now | Start the configured irrigation channels. |
| Stop Irrigation Now | Close irrigation valves and stop related relay channels. |
| Maintenance Mode | Pause automations while service work is in progress. |
| Resume Normal | Re-enable paused automations and restore normal operation. |
Run a Scene
Run a Scene
Step 1 / 6
9:41
1
Open the HPzenAi app.
Step 1 / 6
Good Scene Practice
- Use the fixed scene card that matches the action you want to run.
- Use Emergency Stop only for immediate shutdown behavior.
- Test scenes during commissioning before leaving them available for daily users.