Irrigation

Scheduled Watering

Configure Scheduled Watering in HPzenAi Smart. Runs watering automatically at planned times.

What it does

Water on a schedule for a fixed duration.

Runs watering automatically at planned times. Use this automation when the selected field devices should work together without repeated manual setup.

CategoryIrrigation

Works with

ValvesRelay ControllersMotor Controllers

Automation Logic

When

Trigger

The selected watering schedule time is reached.

Default

At 6:00 AM daily

Choices

At a scheduled timeChoose timeDailyWeekdaysWeekendsCustom days

Example: run at 6:00 AM every day, or change the time and repeat days in the app.

If

Condition

The zone valve or relay channel is available and the active time allows watering.

Default

No condition

Choices

No condition

Example: leave No condition selected when the trigger alone should run the workflow.

Then

Action

Open the selected zone or relay for the configured watering duration.

Default

Open the valve for 30 min

Choices

Open the valve for15 min30 min45 minEnter valueOnly notify me

Example: choose "Open the valve for" and keep the default 30 min, select another preset, or enter another value.

Active

Allowed Time

Use Day, early morning, or the planned irrigation window.

Default

All day

Choices

All dayDay (6 AM - 6 PM)Night (6 PM - 6 AM)

Example: keep All day for protection workflows, or choose Day or Night when operation should stay inside site hours.

Automation Details

Recommended use

Gardens, farms, landscape zones, and greenhouse watering.

Device Inputs

Valves, Relay Controllers, Motor Controllers

Output Behavior

Open the selected zone or relay for the configured watering duration.

Safety Note

Avoid overlapping zones unless the water supply can support the combined flow.

Test Method

Run a short duration and confirm the correct zone opens and closes.

Visual reference coming soon

Future screenshot area for the Scheduled Watering setup screen and saved Smart card.

Scheduled Watering Walkthrough

Walkthrough video coming soon

Before You Start

Device Readiness

Link every device used by this workflow and confirm each one is online.

Device Selection

Choose the exact tank, pump, valve, relay, or meter that should be controlled.

Safe Test

Test with safe thresholds or manual observation before leaving the workflow enabled.

Guided Setup

Set Up Scheduled Watering

Step 1 / 12

9:41

1

Open the HPzenAi app.

Step 1 / 12

Commissioning Checks

• Confirm the intended irrigation zone runs for the expected duration.
• Run a short duration and confirm the correct zone opens and closes.
• Confirm the saved card shows the correct workflow, devices, schedule, and enabled state.
• Review the event history after testing so the action is recorded as expected.
• Keep safety-critical workflows active all day unless the site needs a specific time window.

Troubleshooting

• If the Save button is disabled, complete every required trigger, condition, action, and timing field.
• If the workflow does not run, confirm the devices are online and the active time allows it to run now.
• If the action does not complete, check whether the target device is already in that state or cannot accept commands.
• If notification behavior is missing, confirm phone notification permission and recent device data.

Create an AutomationWorkflow CatalogSchedules & Active TimeTroubleshooting