Irrigation

Zone Sequence

Configure Zone Sequence in HPzenAi Smart. Waters multiple zones one after another.

What it does

Water zones one after another automatically.

Waters multiple zones one after another. Use this automation when the selected field devices should work together without repeated manual setup.

CategoryIrrigation

Works with

ValvesRelay ControllersMotor Controllers

Automation Logic

When

Trigger

The sequence schedule starts or the user starts the sequence.

Default

At 6:00 AM daily

Choices

At a scheduled timeChoose timeDailyWeekdaysWeekendsCustom days

Example: run at 6:00 AM every day, or change the time and repeat days in the app.

If

Condition

All selected zones are available and the previous zone has completed.

Default

No condition

Choices

No condition

Example: leave No condition selected when the trigger alone should run the workflow.

Then

Action

Run each zone in order with the configured duration and gap.

Default

Run each zone for 15 min

Choices

Run each zone for10 min15 min20 minEnter valueOnly notify me

Example: choose "Run each zone for" and keep the default 15 min, select another preset, or enter another value.

Active

Allowed Time

Use the irrigation window that matches site watering rules.

Default

All day

Choices

All dayDay (6 AM - 6 PM)Night (6 PM - 6 AM)

Example: keep All day for protection workflows, or choose Day or Night when operation should stay inside site hours.

Automation Details

Recommended use

Multi-zone irrigation where only one zone should run at a time.

Device Inputs

Valves, Relay Controllers, Motor Controllers

Output Behavior

Run each zone in order with the configured duration and gap.

Safety Note

Keep a rest gap when pressure needs time to recover between zones.

Test Method

Use short durations and verify the zone order before using full watering times.

Visual reference coming soon

Future screenshot area for the Zone Sequence setup screen and saved Smart card.

Zone Sequence Walkthrough

Walkthrough video coming soon

Before You Start

Device Readiness

Link every device used by this workflow and confirm each one is online.

Device Selection

Choose the exact tank, pump, valve, relay, or meter that should be controlled.

Safe Test

Test with safe thresholds or manual observation before leaving the workflow enabled.

Guided Setup

Set Up Zone Sequence

Step 1 / 12

9:41

1

Open the HPzenAi app.

Step 1 / 12

Commissioning Checks

• Confirm the intended irrigation zone runs for the expected duration.
• Use short durations and verify the zone order before using full watering times.
• Confirm the saved card shows the correct workflow, devices, schedule, and enabled state.
• Review the event history after testing so the action is recorded as expected.
• Keep safety-critical workflows active all day unless the site needs a specific time window.

Troubleshooting

• If the Save button is disabled, complete every required trigger, condition, action, and timing field.
• If the workflow does not run, confirm the devices are online and the active time allows it to run now.
• If the action does not complete, check whether the target device is already in that state or cannot accept commands.
• If notification behavior is missing, confirm phone notification permission and recent device data.

Create an AutomationWorkflow CatalogSchedules & Active TimeTroubleshooting