Leak & Flow

Slow Leak Watch

Configure Slow Leak Watch in HPzenAi Smart. Catches small continuous leakage over time.

What it does

Catch small continuous leakage over a longer window.

Catches small continuous leakage over time. Use this automation when the selected field devices should work together without repeated manual setup.

CategoryLeak & Flow

Works with

Water MetersValvesMotor Controllers

Automation Logic

When

Trigger

Low but continuous flow is detected for longer than the selected watch period.

Default

Small flow continues for 4 h

Choices

Small flow continues for2 h4 h8 hEnter value

Example: choose "Small flow continues for" and keep the default 4 h, select another preset, or enter another value.

If

Condition

The flow is outside allowed operation and below normal usage patterns.

Default

All valves are closed

Choices

All valves are closedNo condition

Example: choose "All valves are closed" for the default if behavior.

Then

Action

Send a slow-leak alert or run the configured response.

Default

Close the valve and notify me

Choices

Close the valve and notify meOnly notify me

Example: choose "Close the valve and notify me" for the default then behavior.

Active

Allowed Time

Use All day for leak monitoring.

Default

All day

Choices

All dayDay (6 AM - 6 PM)Night (6 PM - 6 AM)

Example: keep All day for protection workflows, or choose Day or Night when operation should stay inside site hours.

Automation Details

Recommended use

Toilets, taps, small pipe leaks, and low-flow loss detection.

Device Inputs

Water Meters, Valves, Motor Controllers

Output Behavior

Send a slow-leak alert or run the configured response.

Safety Note

Tune the watch duration so normal short usage does not create false alerts.

Test Method

Use a controlled small flow and confirm the alert only after the watch period.

Visual reference coming soon

Future screenshot area for the Slow Leak Watch setup screen and saved Smart card.

Slow Leak Watch Walkthrough

Walkthrough video coming soon

Before You Start

Device Readiness

Link every device used by this workflow and confirm each one is online.

Device Selection

Choose the exact tank, pump, valve, relay, or meter that should be controlled.

Safe Test

Test with safe thresholds or manual observation before leaving the workflow enabled.

Guided Setup

Set Up Slow Leak Watch

Step 1 / 12

9:41

1

Open the HPzenAi app.

Step 1 / 12

Commissioning Checks

• Confirm the alert or shutoff action happens when flow becomes unsafe.
• Use a controlled small flow and confirm the alert only after the watch period.
• Confirm the saved card shows the correct workflow, devices, schedule, and enabled state.
• Review the event history after testing so the action is recorded as expected.
• Keep safety-critical workflows active all day unless the site needs a specific time window.

Troubleshooting

• If the Save button is disabled, complete every required trigger, condition, action, and timing field.
• If the workflow does not run, confirm the devices are online and the active time allows it to run now.
• If the action does not complete, check whether the target device is already in that state or cannot accept commands.
• If notification behavior is missing, confirm phone notification permission and recent device data.

Create an AutomationWorkflow CatalogSchedules & Active TimeTroubleshooting