Scenes

Fill Tank Now

Configure Fill Tank Now in HPzenAi Smart. Runs a manual one-tap tank fill sequence.

What it does

One tap: open the inlet, run the pump, stop at full.

Runs a manual one-tap tank fill sequence. Use this scene when the selected field devices should work together without repeated manual setup.

CategoryScenes

Works with

Motor ControllersValvesRelay Controllers

Automation Logic

When

Trigger

A user taps Run on the saved scene card.

Default

When I run it from the app

Choices

When I run it from the appAt a scheduled timeChoose timeDailyWeekdaysWeekendsCustom days

Example: tap Run on the saved card when you want this action to happen.

If

Condition

The tank is not full, source water is available, and the controlled devices are online.

Default

No condition

Choices

No condition

Example: leave No condition selected when the trigger alone should run the workflow.

Then

Action

Open the inlet or start the pump and stop when the tank reaches the full condition.

Default

Open the inlet valve and run the pump until full

Choices

Open the inlet valve and run the pump until fullFill the tank and notify me when done

Example: choose "Open the inlet valve and run the pump until full" for the default then behavior.

Active

Allowed Time

Manual scene. Keep available when users need controlled tank filling on demand.

Default

All day

Choices

All dayDay (6 AM - 6 PM)Night (6 PM - 6 AM)

Example: keep All day for protection workflows, or choose Day or Night when operation should stay inside site hours.

Automation Details

Recommended use

On-demand filling during commissioning, service visits, or unusual water demand.

Device Inputs

Motor Controllers, Valves, Relay Controllers

Output Behavior

Open the inlet or start the pump and stop when the tank reaches the full condition.

Safety Note

Keep full-stop and dry-source protection active with this scene.

Test Method

Tap Run during supervision and confirm the sequence stops at full.

Visual reference coming soon

Future screenshot area for the Fill Tank Now setup screen and saved Smart card.

Fill Tank Now Walkthrough

Walkthrough video coming soon

Before You Start

Device Readiness

Link every device used by this workflow and confirm each one is online.

Device Selection

Choose the exact tank, pump, valve, relay, or meter that should be controlled.

Safe Test

Test with safe thresholds or manual observation before leaving the workflow enabled.

Guided Setup

Set Up Fill Tank Now

Step 1 / 11

9:41

1

Open the HPzenAi app.

Step 1 / 11

Commissioning Checks

• Confirm the scene only runs when a user taps Run.
• Tap Run during supervision and confirm the sequence stops at full.
• Confirm the saved card shows the correct workflow, devices, schedule, and enabled state.
• Review the event history after testing so the action is recorded as expected.
• Keep safety-critical workflows active all day unless the site needs a specific time window.

Troubleshooting

• If the Save button is disabled, complete every required trigger, condition, action, and timing field.
• If the workflow does not run, confirm the devices are online and the active time allows it to run now.
• If the action does not complete, check whether the target device is already in that state or cannot accept commands.
• If notification behavior is missing, confirm phone notification permission and recent device data.

Create an AutomationWorkflow CatalogSchedules & Active TimeTroubleshooting