Scenes

Maintenance Mode

Configure Maintenance Mode in HPzenAi Smart. Pauses automation behavior while service work is in progress.

What it does

Pause automations while service work is in progress.

Pauses automation behavior while service work is in progress. Use this scene when the selected field devices should work together without repeated manual setup.

CategoryScenes

Works with

Motor ControllersValvesRelay Controllers

Automation Logic

When

Trigger

A user taps Run before maintenance begins.

Default

When I run it from the app

Choices

When I run it from the app

Example: tap Run on the saved card when you want this action to happen.

If

Condition

The selected automations or devices can be paused safely.

Default

No condition

Choices

No condition

Example: leave No condition selected when the trigger alone should run the workflow.

Then

Action

Pause selected automations or set devices to the maintenance state.

Default

Pause automations for 2 h

Choices

Pause automations for1 h2 h4 hEnter valuePause automations and notify me

Example: choose "Pause automations for" and keep the default 2 h, select another preset, or enter another value.

Active

Allowed Time

Manual scene. Use only while maintenance work is active.

Default

All day

Choices

All dayDay (6 AM - 6 PM)Night (6 PM - 6 AM)

Example: keep All day for protection workflows, or choose Day or Night when operation should stay inside site hours.

Automation Details

Recommended use

Pump service, valve service, wiring checks, and sensor replacement.

Device Inputs

Motor Controllers, Valves, Relay Controllers

Output Behavior

Pause selected automations or set devices to the maintenance state.

Safety Note

Do not leave maintenance mode active after work is complete.

Test Method

Confirm selected automations pause and do not issue field commands during maintenance.

Visual reference coming soon

Future screenshot area for the Maintenance Mode setup screen and saved Smart card.

Maintenance Mode Walkthrough

Walkthrough video coming soon

Before You Start

Device Readiness

Link every device used by this workflow and confirm each one is online.

Device Selection

Choose the exact tank, pump, valve, relay, or meter that should be controlled.

Safe Test

Test with safe thresholds or manual observation before leaving the workflow enabled.

Guided Setup

Set Up Maintenance Mode

Step 1 / 11

9:41

1

Open the HPzenAi app.

Step 1 / 11

Commissioning Checks

• Confirm the scene only runs when a user taps Run.
• Confirm selected automations pause and do not issue field commands during maintenance.
• Confirm the saved card shows the correct workflow, devices, schedule, and enabled state.
• Review the event history after testing so the action is recorded as expected.
• Keep safety-critical workflows active all day unless the site needs a specific time window.

Troubleshooting

• If the Save button is disabled, complete every required trigger, condition, action, and timing field.
• If the workflow does not run, confirm the devices are online and the active time allows it to run now.
• If the action does not complete, check whether the target device is already in that state or cannot accept commands.
• If notification behavior is missing, confirm phone notification permission and recent device data.

Create an AutomationWorkflow CatalogSchedules & Active TimeTroubleshooting