Scenes
Resume Normal
Configure Resume Normal in HPzenAi Smart. Restores normal automation behavior after a pause or service window.
What it does
Re-enable paused automations and restore normal operation.
Restores normal automation behavior after a pause or service window. Use this scene when the selected field devices should work together without repeated manual setup.
Automation Logic
Trigger
A user taps Run after confirming the site is ready.
When I run it from the app
Example: tap Run on the saved card when you want this action to happen.
Condition
Devices are online and paused automations are safe to resume.
No condition
Example: leave No condition selected when the trigger alone should run the workflow.
Action
Re-enable selected automations and restore normal operating state.
Resume all automations
Example: choose "Resume all automations" for the default then behavior.
Allowed Time
Manual scene. Use after maintenance, holiday mode, or temporary shutdown.
All day
Example: keep All day for protection workflows, or choose Day or Night when operation should stay inside site hours.
Automation Details
Recommended use
Returning the site to automatic control after manual intervention.
Motor Controllers, Valves, Relay Controllers
Re-enable selected automations and restore normal operating state.
Confirm field equipment is ready before resuming automatic commands.
Run after a controlled pause and confirm saved automations return to the expected enabled state.
Before You Start
Device Readiness
Link every device used by this workflow and confirm each one is online.
Device Selection
Choose the exact tank, pump, valve, relay, or meter that should be controlled.
Safe Test
Test with safe thresholds or manual observation before leaving the workflow enabled.
Guided Setup
Set Up Resume Normal
Open the HPzenAi app.
Commissioning Checks
- Confirm the scene only runs when a user taps Run.
- Run after a controlled pause and confirm saved automations return to the expected enabled state.
- Confirm the saved card shows the correct workflow, devices, schedule, and enabled state.
- Review the event history after testing so the action is recorded as expected.
- Keep safety-critical workflows active all day unless the site needs a specific time window.
Troubleshooting
- If the Save button is disabled, complete every required trigger, condition, action, and timing field.
- If the workflow does not run, confirm the devices are online and the active time allows it to run now.
- If the action does not complete, check whether the target device is already in that state or cannot accept commands.
- If notification behavior is missing, confirm phone notification permission and recent device data.