Scenes
Stop Irrigation Now
Configure Stop Irrigation Now in HPzenAi Smart. Stops irrigation immediately from one saved action.
What it does
Close irrigation valves and stop related relay channels.
Stops irrigation immediately from one saved action. Use this scene when the selected field devices should work together without repeated manual setup.
Automation Logic
Trigger
A user taps Run on the saved scene card.
When I run it from the app
Example: tap Run on the saved card when you want this action to happen.
Condition
Irrigation valves, relays, or booster equipment are active.
No condition
Example: leave No condition selected when the trigger alone should run the workflow.
Action
Close irrigation valves and stop related relay channels or pumps.
Stop irrigation
Example: choose "Stop irrigation" for the default then behavior.
Allowed Time
Manual scene. Keep available wherever irrigation can be stopped by users.
All day
Example: keep All day for protection workflows, or choose Day or Night when operation should stay inside site hours.
Automation Details
Recommended use
Unexpected rain, maintenance, leaks, or field inspection.
Motor Controllers, Valves, Relay Controllers
Close irrigation valves and stop related relay channels or pumps.
Include every irrigation output that should stop together.
Start a short irrigation run and confirm this scene stops it.
Before You Start
Device Readiness
Link every device used by this workflow and confirm each one is online.
Device Selection
Choose the exact tank, pump, valve, relay, or meter that should be controlled.
Safe Test
Test with safe thresholds or manual observation before leaving the workflow enabled.
Guided Setup
Set Up Stop Irrigation Now
Open the HPzenAi app.
Commissioning Checks
- Confirm the scene only runs when a user taps Run.
- Start a short irrigation run and confirm this scene stops it.
- Confirm the saved card shows the correct workflow, devices, schedule, and enabled state.
- Review the event history after testing so the action is recorded as expected.
- Keep safety-critical workflows active all day unless the site needs a specific time window.
Troubleshooting
- If the Save button is disabled, complete every required trigger, condition, action, and timing field.
- If the workflow does not run, confirm the devices are online and the active time allows it to run now.
- If the action does not complete, check whether the target device is already in that state or cannot accept commands.
- If notification behavior is missing, confirm phone notification permission and recent device data.