Motor Controllers
Product Overview
Complete smart motor starter for single-phase motors. Pre-assembled with contactor, overload relay, and MX-1P IoT module — motor wires directly to the output terminals.
Section: Starter 1-Phase
What is the Starter 1-Phase?
The HPzenAi Starter 1-Phase (SP-1P) is a complete smart motor starter assembly for single-phase 220V AC motors. Unlike the MX-1P retrofit module, the SP-1P includes a single-phase contactor and overload relay built into the assembly — the motor wires directly to the SP-1P output terminals. A built-in MX-1P IoT module provides remote control, scheduling, dry-run protection, and fault monitoring via the HPzenAi app and gateway.
Highlights
- Complete Assembly: Contactor, overload relay, and IoT control module pre-wired and assembled — wire in L, N, and motor output; the unit does the rest
- Built-In Overload Protection: Integrated thermal overload relay with adjustable FLA dial — set to motor nameplate current for motor burn-out protection
- Remote Start/Stop: Remote manual control, scheduling, and sensor-triggered automation via the HPzenAi app and RS485-connected gateway
- Dry-Run Protection: Integrates with HPzenAi LS-PRE level sensors to stop the motor automatically when the water source runs dry
Product Specifications
| Attribute | Detail |
|---|---|
| Assembly Type | Complete motor starter — contactor + overload relay + MX-1P IoT module |
| Motor Phase | Single-phase, 220V AC |
| Supply Input | L (Line) and N (Neutral) from mains circuit breaker |
| Motor Output | U (Line) and N to motor windings |
| Contactor Rating | As per selected model — see Available Models below |
| Overload Relay | Thermal overload relay with adjustable FLA dial — set to motor nameplate current |
| IoT Module | Built-in MX-1P module — RS485 Modbus RTU, 12V DC control supply |
| Gateway Compatibility | HPzenAi GW-W1 (Wi-Fi) · GW-XR1 (SIM/RF) |
| Status Indicator | Multi-colour LED: green (running), amber (fault), blue (pairing) |
| Mounting | 35 mm DIN rail or direct panel mount (depending on contactor size) |
Applications & Use Cases
| Application | Description |
|---|---|
| New Panel Builds | Primary motor control device in new single-phase motor control panels — replaces separate contactor and overload relay components |
| Domestic Borewell Pump Starters | Complete smart starter for household submersible or surface borewell pumps — no separate starter panel needed |
| Agricultural 1-Phase Pumps | Direct replacement for manual single-phase pump starters in agriculture — adds scheduling and remote control |
| Tank Fill Controllers | Combine with HPzenAi level sensor for fully automatic level-controlled tank filling |
| OEM Motor Control Panels | Ready-to-install motor control assembly for OEM panel builders and system integrators |
Available Models
Series and Models
SP-1P-9
Starter 1-Phase — 9A Contactor (up to 2.2 kW)
- SP-1P-9: 9A contactor — suitable for up to 2.2 kW single-phase motor; Built-in thermal overload relay (adjustable 2.5–9A); 220V AC single-phase; MX-1P IoT module built in; RS485 Modbus RTU; DIN rail mount
SP-1P-18
Starter 1-Phase — 18A Contactor (up to 4 kW)
- SP-1P-18: 18A contactor — suitable for up to 4 kW single-phase motor; Built-in thermal overload relay (adjustable 6–18A); 220V AC single-phase; MX-1P IoT module built in; RS485 Modbus RTU; DIN rail mount